/
EN
/

Site Navigation

Your Account

Choose Language

Apple PowerBook G3 400 Keyboard Replacement

Introduction

This guide will show you how to replace the keyboard in a simple step by step process.

  1. Apple PowerBook G3 400 Keyboard Replacement, Apple PowerBook G3 400 Keyboard Replacement: step 1, image 1 of 1

    • Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.

    • To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.

  3. Apple PowerBook G3 400 Keyboard Replacement: step 2, image 1 of 1

    • Pull the keyboard ribbon vertically from the logic board to release connection.

    • The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.

    • Remove battery and CD/DVD drives before proceeding any further.

  4. Apple PowerBook G3 400 Keyboard Replacement: step 3, image 1 of 1

    • Your computer should look approximately like this.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

System

Member since: 09/24/09

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 6