Introduction
The Remote Control Socket is not difficult to access. However, it's connections are soldered, so it will be difficult to remove.
What you need
-
-
Remove two 4.8 mm black screws on the front of the camera.
-
-
-
Remove one 4.3 mm black screw under the lens ring and one 4.8 mm black screw on the bottom of the camera.
-
-
-
Remote Control Socket is now secured by 3 wires.
-
Desolder connections to replace Remote Control Socket.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.