Skip to main content

Canon Powershot S410 Memory Card Replacement

  1. Canon Powershot S410 Memory Card Replacement, Canon Powershot S410 Memory Card Replacement: step 1, image 1 of 2 Canon Powershot S410 Memory Card Replacement, Canon Powershot S410 Memory Card Replacement: step 1, image 2 of 2
    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. Canon Powershot S410 Memory Card Replacement: step 2, image 1 of 1
    • Rotate the camera so that the slot is horizontal.

    • Pull the orange lever and the battery will spring out slightly.

  3. Canon Powershot S410 Memory Card Replacement: step 3, image 1 of 1
    • Grasp battery and fully pull out of slot

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

  4. Canon Powershot S410 Memory Card Replacement: step 4, image 1 of 2 Canon Powershot S410 Memory Card Replacement: step 4, image 2 of 2
    • Position the camera as if you were going to take a picture.

    • Locate the sliding button labeled "CF OPEN."

    • Place your finger on the button and slide it in the direction of the arrow.

    • The side panel will flip open revealing the compact flash memory card.

  5. Canon Powershot S410 Memory Card Replacement: step 5, image 1 of 1
    • Turn the camera to the right side.

    • Locate the gray button at the bottom of the open slot.

    • Place your finger on the button and push it down.

    • The memory card will pop out slightly.

  6. Canon Powershot S410 Memory Card Replacement: step 6, image 1 of 1
    • Grasp edges of card and pull out of slot.

    • If you insert a new memory card you may be asked to format it after turning on the camera.

    • Make sure that the arrow on the flash card is pointed towards the direction of the slot

    • Do not force the memory card into the slot. Any signs of resistance may mean the card is improperly oriented.

Conclusion

Once a new memory card has been inserted close the swinging door and you're done.

System

Member since: 09/24/09

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 4