What you need
-
-
Place the TV Screen side-down.
-
Using PH#2 screwdriver, begin to loose the screws of the back-casing (highlighted in green boxes).
-
Using PH#1 screwdriver, finish loosening the last two screws which are located in the connectors' square.
-
Manually pry twelve clips that fix the back-housing attached to the front frame.
-
Disconnect connectors from cables and switchers (red box).
-
Remove the plastic back-casing.
-
-
-
Remove cables: Disconnect nine connectors (highlighted in red boxes) and twelve clips, and trip off the tapes used to fix cables to the metal casing.
-
Remove Printed Circuit Boards (PCB): Using PH#2 screwdriver, loose the four screws of the protective metal part.
-
Then, using PH#1 screwdriver, loose the sixteen screws (highlighted in green boxes) of the PCBs.
-
-
-
Remove the speakers by extracting them manually from their mountings (blue boxes).
-
-
-
Trip off adhesives in the sides of the metal back-casing (turquoise box).
-
Using PH#1 screwdriver, begin to loose the thirty-three screws of the back-side (green box).
-
-
-
Continue to work your way around the sides until you can pull off the LCD PCB protective plastic part.
-
Then, loose the two connectors of PCBs (red box).
-
Carefully place the TV screen upwards and remove the front frame and LCD panel.
-
-
-
Manually pull the inner frame off by levering the twenty-four clips.
-
Remove the already exposed polarized foils.
-
-
-
Using PH#1 screwdriver, loose eighteen screws and remove the metal mounting with the LED PCBs.
-
Using slotted screwdriver, separate the PCB from the metal part. Note that this step is destructive.
-
-
-
Remove plastic parts with PH#1 screwdriver and unscrew seven screws used to attach them to the metal-casing.
-