What you need
-
-
Start the TV opening from the back side.
-
The back cover is fastened with twenty-three PH#2 screws (green marking).
-
Work your way around the TV until you can pull off the back cover.
-
-
-
Disconnect all thirty-one connectors (highlighted in red boxes) and rip off the tapes (highlighted in blue boxes) used to fix the connectors.
-
Remove Printed Circuit Boards (PCB):
-
Using PH#2 screwdriver, begin to loose the twenty screws.
-
Using PH#1 screwdriver, loose the last seven screws and release the side PCBs.
-
-
-
Remove the speakers by extracting them manually from their mountings (blue boxes).
-
-
-
Next, remove the metal plates using PH#2 screwdriver (thirteen screws).
-
-
-
Remove the front glass frame from the dispaly unit. First, loose six PH#2 screws from the top and two PH#1 screws from the bottom of the frame.
-
-
-
The rest of the plasma panel is glued to a metal plate. Further disassembly not possible.
-