Skip to main content

Vestel 40'' TV set

What you need

  1. Vestel 40'' TV set, Opening: step 1, image 1 of 1
    • Place the TV screen side-down.

    • Using PH#2 screwdriver, begin to loose the twenty-one screws of the back-casing (highlighted in green boxes).

    • Work your way around the TV until you can pull the back cover off.

  2. Vestel 40'' TV set, Removal of Printed Circuit Boards (PCB): step 2, image 1 of 2 Vestel 40'' TV set, Removal of Printed Circuit Boards (PCB): step 2, image 2 of 2
    • Remove cables: Disconnect all fifteen connectors (highlighted in red boxes) and separate the tapes used to fix cables to the metal-casing.

    • Remove Printed Circuit Boards (PCBs):

    • Using PH#2 screwdriver, begin to loose the four screws of the protective metal mounting (highlighted in green boxes).

    • Using PH#1 screwdriver, continue to loose the rest of the twenty screws that fix the PCB to the metal-casing.

  3. Vestel 40'' TV set, Removal of Speakers: step 3, image 1 of 1
    • Remove the speakers by extracting them manually from their mountings (blue boxes).

  4. Vestel 40'' TV set, Removal of Liquid Crystal Display (LCD): step 4, image 1 of 2 Vestel 40'' TV set, Removal of Liquid Crystal Display (LCD): step 4, image 2 of 2
    • Place the TV screen side-up.

    • Remove the front-frame that is already exposed.

    • Using PH#1 screwdriver, begin to loose the twelve screws of the inner frame from the left corner (green boxes).

    • Continue to work your way around the frame counterclockwise until you can pull the frame off.

    • Remove the already exposed LCD panel.

  5. Vestel 40'' TV set, Removal of Polarized Foils: step 5, image 1 of 2 Vestel 40'' TV set, Removal of Polarized Foils: step 5, image 2 of 2
    • Using PH#1 screwdriver, begin to loose the ten screws of the plastic frame from the left corner (green boxes).

    • Continue to work your way around the frame counterclockwise until you can pull it off.

    • Remove the already exposed polarized foils.

  6. Vestel 40'' TV set, Removal of Backlights (LED): step 6, image 1 of 3 Vestel 40'' TV set, Removal of Backlights (LED): step 6, image 2 of 3 Vestel 40'' TV set, Removal of Backlights (LED): step 6, image 3 of 3
    • Use your fingers to pry open the cable connectors (red boxes).

    • Using PH#1 screwdriver, loose the eighteen screws and obtain the metal-mountings where the LED PCBs are located.

    • Using PH#0 screwdriver, loose five screws per each of the six LED PCBs.

    • Then, use slotted screwdriver to pry open the PCB strips from the metal-mountings. Note that this step is destructive.

  7. Vestel 40'' TV set, TV Dismantling Fractions: step 7, image 1 of 1
    • All fractions obtained after TV dismantling.

Finish Line

Amaia

Member since: 03/23/16

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 37