Skip to main content

Stereo System

What you need

  1. Stereo System, Stereo System: step 1, image 1 of 2 Stereo System, Stereo System: step 1, image 2 of 2
    • Remove the tapes, in case there are any left inside.

    • Cut off the power cable.

  2. Stereo System: step 2, image 1 of 3 Stereo System: step 2, image 2 of 3 Stereo System: step 2, image 3 of 3
    • Remove all the screws from the case.

  3. Stereo System: step 3, image 1 of 2 Stereo System: step 3, image 2 of 2
    • Remove the case.

    • Fold metal cases for better storage.

  4. Stereo System: step 4, image 1 of 3 Stereo System: step 4, image 2 of 3 Stereo System: step 4, image 3 of 3
    • Remove the screws from the CD deck.

    • Remove the CD deck.

    • Seperate the large parts.

  5. Stereo System: step 5, image 1 of 3 Stereo System: step 5, image 2 of 3 Stereo System: step 5, image 3 of 3
    • Remove the wires from the PWBs.

    • Unscrew the PWBs and remove them.

  6. Stereo System: step 6, image 1 of 1
    • Remove the CD drive.

  7. Stereo System: step 7, image 1 of 2 Stereo System: step 7, image 2 of 2
    • Unscrew the cog from the motor.

    • Pry off the case of the motor.

  8. Stereo System: step 8, image 1 of 2 Stereo System: step 8, image 2 of 2
    • Unscrew the PWB and remove it.

    • Remove the magnet from the motor.

  9. Stereo System: step 9, image 1 of 2 Stereo System: step 9, image 2 of 2
    • Cut the wires.

    • Remove all the screws from the PWB.

  10. Stereo System: step 10, image 1 of 2 Stereo System: step 10, image 2 of 2
    • Unscrew the PWB of the display.

    • Cut off the wires of the display PWB.

  11. Stereo System: step 11, image 1 of 2 Stereo System: step 11, image 2 of 2
    • Bend off the display.

    • Cut off the display.

  12. Stereo System: step 12, image 1 of 2 Stereo System: step 12, image 2 of 2
    • Unscrew the display and lever it off.

  13. Stereo System: step 13, image 1 of 2 Stereo System: step 13, image 2 of 2
    • Unscrew the frame.

    • Remove any large capacitor.

  14. Stereo System: step 14, image 1 of 3 Stereo System: step 14, image 2 of 3 Stereo System: step 14, image 3 of 3
    • Cut the wires off the PWB.

    • Remove the screws from the aluminium heat sinks.

  15. Stereo System: step 15, image 1 of 3 Stereo System: step 15, image 2 of 3 Stereo System: step 15, image 3 of 3
    • Unscrew and remove the remaining heat sinks.

    • Again, remove any other large capacitors.

  16. Stereo System: step 16, image 1 of 2 Stereo System: step 16, image 2 of 2
    • Unscrew and remove the coil.

  17. Stereo System: step 17, image 1 of 1
    • Separate the remaining materials according to their type and go on with the appropriate data sheet (e.g. aluminium, ferrous metals, plastic, further PWBs, etc.).

    • Make sure the plastic parts are completely free of metal pieces.

Finish Line

Tobias Isakeit

Member since: 03/15/18

21 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33