Introduction
Use this guide to install a replacement keyboard display.
What you need
-
-
Turn the keyboard over so that the keys are facing the ground.
-
-
-
Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.
-
-
-
Using a flat head screwdriver, carefully pry up the beige ribbon connectors and remove the wires from them.
-
Use a slightly upward force with the screwdriver as parallel to the ground as possible.
-
Be sure to unplug the smaller ribbon that connects to a different circuit board.
-
-
-
Move the ribbons out of the way and remove the eight 10mms crews in the middle that hold the circuit board down.
-
Remove the two 12mm screws in the corner of the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.