/
EN
/

Site Navigation

Your Account

Choose Language

Yamaha YPG-225 Keys Replacement

Introduction

Learn to remove and replace a broken key for your keyboard with this guide. The process is fairly simple and mostly requires the removal of screws.

What you need

  1. Yamaha YPG-225 Keys Replacement, Yamaha YPG-225 Keys Replacement: step 1, image 1 of 1

    • Turn the keyboard over so that the keys are facing the ground.

  2. Yamaha YPG-225 Keys Replacement: step 2, image 1 of 1

    • Pop the tabs on the battery casing and remove it from the back plate.

  3. Yamaha YPG-225 Keys Replacement: step 3, image 1 of 1

    • Locate the six batteries and remove them from the battery cavity.

  4. Yamaha YPG-225 Keys Replacement: step 4, image 1 of 1

    • Remove the six 10mm screws at the top of the backplate.

  6. Yamaha YPG-225 Keys Replacement: step 5, image 1 of 1

    • Remove the seven 12mm screws in the middle of the back plate.

  7. Yamaha YPG-225 Keys Replacement: step 6, image 1 of 1

    • Remove the eight 10mm screws from the side and the bottom of the back plate.

  8. Yamaha YPG-225 Keys Replacement: step 7, image 1 of 1

    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard

  9. Yamaha YPG-225 Keys Replacement: step 8, image 1 of 2 Yamaha YPG-225 Keys Replacement: step 8, image 2 of 2

    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

  10. Yamaha YPG-225 Keys Replacement: step 9, image 1 of 1

    • Remove the 32mm screws that hold keys down.

    • Depending on which block of keys you wish to remove, there may be four screws instead of three.

  11. Yamaha YPG-225 Keys Replacement: step 10, image 1 of 1

    • Remove the block of keys that holds the key you wish to install.

    • To do this, apply a small force away from the top of the keys and slightly toward the floor.

    • If done correctly, the block of keys will come to a slight downward angle.

  12. Yamaha YPG-225 Keys Replacement: step 11, image 1 of 2 Yamaha YPG-225 Keys Replacement: step 11, image 2 of 2

    • Press the tab on the back side of the block of keys out and detach the black keys.

  13. Yamaha YPG-225 Keys Replacement: step 12, image 1 of 1

    • Remove the individual white key(s) or the black key set(s) that require replacement.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

System

Member since: 09/24/09

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1