Skip to main content

What you need

  1. Canon EOS Rebel XS Strap Loops Replacement, Canon EOS Rebel XS Strap Loops Replacement: step 1, image 1 of 1
    • Remove the two 4.5mm (.18in) long black screws from the side cover using a #00 Phillips screwdriver.

  2. Canon EOS Rebel XS Strap Loops Replacement: step 2, image 1 of 1
    • On the bottom, remove the last long screw with the Phillips Screwdriver.

    • Use tweezers to lift the panel.

  3. Canon EOS Rebel XS Strap Loops Replacement: step 3, image 1 of 1
    • Remove three medium length screws from the bottom of the camera

  4. Canon EOS Rebel XS Strap Loops Replacement: step 4, image 1 of 1
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

  5. Canon EOS Rebel XS Strap Loops Replacement: step 5, image 1 of 1
    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  6. Canon EOS Rebel XS Strap Loops Replacement: step 6, image 1 of 1
    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

  7. Canon EOS Rebel XS Strap Loops Replacement: step 7, image 1 of 1
    • Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.

  8. Canon EOS Rebel XS Strap Loops Replacement: step 8, image 1 of 1
    • Use your fingertip to pry off the external shutter port cover.

  9. Canon EOS Rebel XS Strap Loops Replacement: step 9, image 1 of 1
    • Remove the two 5mm (.20in) long silver screws securing the grip to the camera using a #00 Phillips screwdriver.

  10. Canon EOS Rebel XS Strap Loops Replacement: step 10, image 1 of 3 Canon EOS Rebel XS Strap Loops Replacement: step 10, image 2 of 3 Canon EOS Rebel XS Strap Loops Replacement: step 10, image 3 of 3
    • Use the spudger tool to carefully pry the grip from the rest of the camera.

  11. Canon EOS Rebel XS Strap Loops Replacement: step 11, image 1 of 1
    • Once the grip is loose, use your fingers to remove it from the camera.

  12. Canon EOS Rebel XS Strap Loops Replacement: step 12, image 1 of 2 Canon EOS Rebel XS Strap Loops Replacement: step 12, image 2 of 2
    • Grasp the eyepiece with your fingers and slide upwards to remove it.

  13. Canon EOS Rebel XS Strap Loops Replacement: step 13, image 1 of 1
    • Remove the following ribbons with the tweezers by gently pulling on them.

    • Remove the three black screws, near the eye piece, using the Phillips Screwdriver.

  14. Canon EOS Rebel XS Strap Loops Replacement: step 14, image 1 of 1
    • Remove the cable heads attached on the front side of the camera next to the lens mount.

    • Be gentle when puling wires lose, use the tweezers to remove the wires.

  15. Canon EOS Rebel XS Strap Loops Replacement: step 15, image 1 of 1
    • You can use your fingers to pull the top panel of the camera.

  16. Canon EOS Rebel XS Strap Loops Replacement: step 16, image 1 of 3 Canon EOS Rebel XS Strap Loops Replacement: step 16, image 2 of 3 Canon EOS Rebel XS Strap Loops Replacement: step 16, image 3 of 3
    • Remove the two 5.0mm (.20in) silver screws from the first loop hole using a #00 Phillips screwdriver (Picture Two).

    • Remove the 6.8mm (.27in) wide head silver screw from the second loop hole using a #00 Phillips screwdriver (Picture Three).

  17. Canon EOS Rebel XS Strap Loops Replacement: step 17, image 1 of 2 Canon EOS Rebel XS Strap Loops Replacement: step 17, image 2 of 2
    • Use your fingers to remove the loop holes.

Conclusion

To reassemble your device, follow these instructions in reverse order.

System

Member since: 09/24/2009

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 0