Skip to main content

What you need

  1. Canon PowerShot S410 Motherboard Battery Replacement, Canon PowerShot S410 Motherboard Battery Replacement: step 1, image 1 of 2 Canon PowerShot S410 Motherboard Battery Replacement, Canon PowerShot S410 Motherboard Battery Replacement: step 1, image 2 of 2
    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. Canon PowerShot S410 Motherboard Battery Replacement: step 2, image 1 of 1
    • Rotate the camera so that the slot is horizontal.

    • Pull the orange lever and the battery will spring out slightly.

  3. Canon PowerShot S410 Motherboard Battery Replacement: step 3, image 1 of 1
    • Grasp battery and fully pull out of slot

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

  4. Canon PowerShot S410 Motherboard Battery Replacement: step 4, image 1 of 1
    • Start by laying the camera flat with the LCD screen facing up.

    • Remove the 3.8mm screw in the upper right corner.

  5. Canon PowerShot S410 Motherboard Battery Replacement: step 5, image 1 of 1
    • Position the camera with the bottom facing up.

    • Remove the 4.8mm screw.

    • Remove the two 2.3mm screws.

  6. Canon PowerShot S410 Motherboard Battery Replacement: step 6, image 1 of 2 Canon PowerShot S410 Motherboard Battery Replacement: step 6, image 2 of 2
    • Position the camera so that the rubber "AV Out Digital" tab is facing upward.

    • Slide this rubber tab out of the way to reveal the bottom screw.

    • Remove the two 3.7mm screws.

  7. Canon PowerShot S410 Motherboard Battery Replacement: step 7, image 1 of 1
    • Turn the camera with the back side facing you.

    • Grip the edges of the back plate, and carefully slide it off.

    • If there is any resistance in movement, double check there are no screws left in the chassis.

  8. Canon PowerShot S410 Motherboard Battery Replacement: step 8, image 1 of 2 Canon PowerShot S410 Motherboard Battery Replacement: step 8, image 2 of 2
    • Orientate the camera as in the picture.

    • Remove the two 2.3mm outer screws.

    • Remove the two 3.8mm screws near the strap bracket.

    • Remove small panel covering mounting bracket.

    • Remove door covering memory card.

  9. Canon PowerShot S410 Motherboard Battery Replacement: step 9, image 1 of 1
    • Rotate the camera so that the bottom side is facing you.

    • Remove the 3.8mm screw below the mounting bracket.

  10. Canon PowerShot S410 Motherboard Battery Replacement: step 10, image 1 of 1
    • Rotate the camera so that the front is facing you.

    • Grasp sides of front cover and carefully pull the front panel off of the camera.

  11. Canon PowerShot S410 Motherboard Battery Replacement: step 11, image 1 of 1
    • Position the camera so that the motherboard is facing you.

    • Remove the plastic flap covering the motherboard.

    • Place edge of iPod Opening Tool in the small opening between the battery and the motherboard.

    • Pry the battery off of the motherboard using the iPod Opening Tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

System

Member since: 09/24/2009

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 9