Canon PowerShot SD1100 IS Function Buttons Replacement - ric

Site Navigation

Guides

Your Account

Log In

Choose Language

Introduction

This guide should be used if our guide, "Cleaning Function Buttons", doesn't fix your function buttons.

What you need

1. Step 1 Canon PowerShot SD1100 IS Function Buttons Replacement
  Remove wrist strap and battery.
  Add Comment
  
  1024
2. Step 2
  Remove 2 screws from each side of the camera (4 total, 0.102 in).
  
  Remove 2 screws from the bottom on the camera (0.138 in).
  
  Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
  Add Comment
  
  1024
3. Step 3
  Gently pull off the front cover.
  
  The plate on the side should come off.
  
  Gently pull off the back cover.
  Add Comment
  
  1024
4. Step 4
  The cases should now be removed.
  Add Comment
  
  1024
6. Step 5
  Use the spudger to disconnect the black tab.
  Add Comment
  
  1024
7. Step 6
  Gently pull off the shutter button assembly.
  Add Comment
  
  1024
8. Step 7
  Use the tweezers to disconnect the microphone cable.
  Add Comment
  
  1024
9. Step 8
  The shutter button assembly should now be removed.
  Add Comment
  
  1024
10. Step 9
  With the spudger, flip up the black tab on the main ribbon.
  Add Comment
  
  1024
11. Step 10
  Gently pull straight out on the ribbon to disconnect it from the logic board.
  Add Comment
  
  1024
12. Step 11
  By hand, gently unfold the function button board and lift it off the frame.
  Add Comment
  
  1024
13. Step 12
  Congratulations! The function button board can now be replaced.
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

System

Member since: 09/24/09

2,562 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 30