Introduction
Use this guide to repair a broken battery door. The battery door on this model tends to break off due to a weak plastic hinge.
What you need
-
-
Remove the two 4.5mm (.18in) long black screws from the side cover using a #00 Phillips screwdriver.
-
-
-
On the bottom, remove the last long screw with the Phillips Screwdriver.
-
Use tweezers to lift the panel.
-
-
-
Remove the two medium length screws on the front panel of the camera above the lens mount.
-
Once you done, you may use the Spudger to panel from non-grip side.
-
-
-
Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.
-
-
-
Remove the two 5mm (.20in) long silver screws securing the grip to the camera using a #00 Phillips screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.