Skip to main content

What you need

  1. Disassembling Canon PowerShot SD1100 IS AV port and Logic board, Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 1, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board, Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 1, image 2 of 2
    • Remove wrist strap and battery.

  2. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 2, image 1 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 2, image 2 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 2, image 3 of 3
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 3, image 1 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 3, image 2 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 3, image 3 of 3
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 4, image 1 of 1
    • The cases should now be removed.

  5. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 5, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 5, image 2 of 2
    • Remove the top-left screw above the LCD screen (0.100 in).

    • Remove the C-shaped plate from the side of the LCD screen.

  6. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 6, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 6, image 2 of 2
    • Remove the screw from the top-right of the LCD screen (0.098 in).

    • Remove the L-shaped bar from the right of the LCD screen.

  7. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 7, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 7, image 2 of 2
    • Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.

  8. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 8, image 1 of 1
    • Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.

    • Be gentle. This ribbon should stay attached to the screen.

  9. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 9, image 1 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 9, image 2 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 9, image 3 of 3
    • Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera.

    • Use the tweezers to lift this ribbon.

    • Use the tweezers to gently peel this ribbon from the one underneath it.

  10. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 10, image 1 of 1
    • The LCD screen should now be removed.

  11. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 11, image 1 of 1
    • Remove the screw located on the side of the camera (0.072 in).

  12. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 12, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 12, image 2 of 2
    • Use the spudger to remove the lens ribbon from the circuit board.

    • Use the spudger to lift the ribbon.

    • This ribbon is connected to the lens, but the flash assembly ribbon is underneath it.

  13. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 13, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 13, image 2 of 2
    • Disconnect the flash assembly ribbon.

    • The flash assembly ribbon is located underneath the lens assembly ribbon.

  14. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 14, image 1 of 1
    • Remove the flash assembly, which includes the capacitor. If it resists, note the small hook on the right side near the bottom.

    • Be careful when taking out the capacitor. It could shock you.

  15. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 15, image 1 of 1
    • The capacitor should now be removed.

  16. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 16, image 1 of 1
    • Remove 4 screws from silver plate (0.106 in).

  17. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 17, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 17, image 2 of 2
    • Use spudger to lift the second lens ribbon.

    • Remember the first ribbon was removed while taking out the flash assembly.

  18. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 18, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 18, image 2 of 2
    • Use spudger to carefully lift the LED light off the upper-left corner of the lens.

  19. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 19, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 19, image 2 of 2
    • Remove the lens.

  20. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 20, image 1 of 1
    • The camera lens should now be removed.

  21. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 21, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 21, image 2 of 2
    • Remove screw from top-right of logic board (0.102 in).

    • Remove screw on the silver plate (0.102 in).

  22. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 22, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 22, image 2 of 2
    • Remove screw from bottom-right of logic board board (0.102 in).

    • The tripod connector can now be removed.

  23. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 23, image 1 of 1
    • Remove screw (0.102 in) from the left side of the logic board.

  24. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 24, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 24, image 2 of 2
    • Using the spudger, disconnect the ribbon cable located on the top of the logic board.

  25. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 25, image 1 of 2 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 25, image 2 of 2
    • The logic board may now be removed from the frame.

  26. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 26, image 1 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 26, image 2 of 3 Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 26, image 3 of 3
    • Remove the remaining screw (0.102 in) located on the camera strap piece.

    • The camera strap piece and the av port/battery/memory card assembly can now be removed.

  27. Disassembling Canon PowerShot SD1100 IS AV port and Logic board: step 27, image 1 of 1
    • This is the final product.

Conclusion

To reassemble your device, follow these instructions in reverse order.

System

Member since: 09/24/2009

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 0