Skip to main content

Introduction

Dismantling and Recycling Centre (DRZ)

Katharina Lenz, Vienna / Austria

Health & Safety

Dismantling doesn't include any harmful steps. Nonetheless workers should wear personal protection equipment like gloves, goggles, apron and robust shoes.

Note: This is a general guide for most lawn edge trimmers. As the construction can differ, the dismantling steps mentioned below can vary in their order. However, the described steps show what parts the removal should focus on.

  1. Unscrew and open the case. Unscrew and open the case. Unscrew and open the case.
    • Unscrew and open the case.

  2. Remove the batteries. Unscrew the blade.
    • Remove the batteries.

    • Unscrew the blade.

  3. Unscrew the gear case.
    • Unscrew the gear case.

  4. Unscrew and open the outer case. Unscrew and open the outer case.
    • Unscrew and open the outer case.

  5. Remove the motor. Cut off the wires of the motor and the PWB. Cut off the wires of the motor and the PWB.
    • Remove the motor.

    • Cut off the wires of the motor and the PWB.

  6. Separate the remaining materials according to their type and go on with the appropriate data sheet (e.g. aluminium, ferrous metals, plastic, further PWBs, etc.).
    • Separate the remaining materials according to their type and go on with the appropriate data sheet (e.g. aluminium, ferrous metals, plastic, further PWBs, etc.).

    • Make sure the plastic parts are completely free of metal pieces.

Finish Line

Tobias Isakeit

Member since: 03/15/2018

21 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 13

ABOUT RIC