/
EN
/

Site Navigation

Your Account

Choose Language

MacBook Unibody Model A1342 Lower Case Replacement

Introduction

Replacing your lower case is easy! It only takes 8 screws.

What you need

  1. MacBook Unibody Model A1342 Lower Case Replacement, MacBook Unibody Model A1342 Lower Case Replacement: step 1, image 1 of 1

    • Remove the eight 4 mm Phillips screws securing the lower case to the MacBook.

  3. MacBook Unibody Model A1342 Lower Case Replacement: step 2, image 1 of 3 MacBook Unibody Model A1342 Lower Case Replacement: step 2, image 2 of 3 MacBook Unibody Model A1342 Lower Case Replacement: step 2, image 3 of 3

    • The lower case is constructed of rubber-coated aluminum. Do not excessively bend the aluminum during removal, as any permanent deformation will cause tolerance issues after reassembly.

    • Slightly lift the lower case near the vent opening.

    • Continue running your fingers between the lower and upper cases until the upper case pops off its retaining clips.

    • The location of these three clips is shown in the third picture.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

System

Member since: 09/24/09

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 0