Skip to main content

Nintendo DSi LED Indicator Board Replacement

What you need

  1. Nintendo DSi LED Indicator Board Replacement, Nintendo DSi LED Indicator Board Replacement: step 1, image 1 of 2 Nintendo DSi LED Indicator Board Replacement, Nintendo DSi LED Indicator Board Replacement: step 1, image 2 of 2
    • Unscrew the two Phillips screws securing the battery cover to the lower case.

    • The screws remain captive to the battery cover.

    • Grasp the battery cover and lift out of the lower case.

  2. Nintendo DSi LED Indicator Board Replacement: step 2, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 2, image 2 of 2
    • Wedge the edge of a spudger in between the top of the battery and its lower case housing and pry upwards to dislodge the battery.

    • Grasp the battery and remove it from the DSi.

  3. Nintendo DSi LED Indicator Board Replacement: step 3, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 3, image 2 of 2
    • Two screws are hidden underneath two rubber feet highlighted in red.

    • Use the tip of a spudger to pry the rubber feet out of the lower case.

  4. Nintendo DSi LED Indicator Board Replacement: step 4, image 1 of 1
    • Remove the following screws securing the lower case to the body of the DSi:

    • Six 5.2 mm Phillips screws.

    • One 2.7 mm Phillips screw.

  5. Nintendo DSi LED Indicator Board Replacement: step 5, image 1 of 3 Nintendo DSi LED Indicator Board Replacement: step 5, image 2 of 3 Nintendo DSi LED Indicator Board Replacement: step 5, image 3 of 3
    • Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi.

    • Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing.

    • Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.

  6. Nintendo DSi LED Indicator Board Replacement: step 6, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 6, image 2 of 2
    • Carefully lift the lower casing from its bottom edge.

    • The lower case is still attached to the motherboard by the volume and SD board cable highlighted in red. Do not try to completely remove the lower case of the DSi yet.

    • Pry the volume and SD board cable up from its socket on the motherboard with the flat edge of a screwdriver.

    • once the cable, highlighted in the orange box, is completely removed then you may take off the entire outer casing.

  7. Nintendo DSi LED Indicator Board Replacement: step 7, image 1 of 1
    • Use the tip of a spudger to pry the power board connector out of its socket on the motherboard.

  8. Nintendo DSi LED Indicator Board Replacement: step 8, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 8, image 2 of 2
    • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on power board ZIF connector.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.

  9. Nintendo DSi LED Indicator Board Replacement: step 9, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 9, image 2 of 2
    • Remove the five 2.6 mm Phillips screws securing the power board to the DSi's framework.

    • Lift and remove the power board out of the DSi.

  10. Nintendo DSi LED Indicator Board Replacement: step 10, image 1 of 2 Nintendo DSi LED Indicator Board Replacement: step 10, image 2 of 2
    • Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.

    • If necessary, transfer the power board ribbon cable to your new power board.

  11. Nintendo DSi LED Indicator Board Replacement: step 11, image 1 of 1
    • LED indicator board remains.

Conclusion

To reassemble your device, follow these instructions in reverse order.

System

Member since: 09/24/09

2,562 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 6