Skip to main content
  1. Place the TV screen side-down.
    • Place the TV screen side-down.

    • Using the PH#1 screwdriver, begin to loose the two screws located in the external connectors' square (highlighted in green boxes).

    • Then, with the PH#2 screwdriver, continue to loose the sixteen screws of the back-casing (highlighted in green boxes).

    • Work your way around the TV until you can pull the back cover off.

  2. Remove cables: Disconnect all sixteen connectors (highlighted in red boxes) and separate the tapes (highlighted in the blue box) used to fix cables to the metal casing. Remove Printed Circuit Boards (PCB):
    • Remove cables: Disconnect all sixteen connectors (highlighted in red boxes) and separate the tapes (highlighted in the blue box) used to fix cables to the metal casing.

    • Remove Printed Circuit Boards (PCB):

    • Using PH#1 screwdriver, begin to loose the twenty-one screws (highlighted in green boxes).

    • Using J1 screwdriver, continue to loose the last two screws located in the bottom PCB protected with a double metal casing.

  3. Remove the speakers by extracting them manually from their mountings (blue boxes).
    • Remove the speakers by extracting them manually from their mountings (blue boxes).

  4. Place the TV screen up and remove the front frame which is already exposed. Using PH#1 screwdriver, begin to loose the twelve screws of the inner frame. Starting at the bottom-right corner, continue to work your way around the frame counterclockwise until you can pull the frame off.
    • Place the TV screen up and remove the front frame which is already exposed.

    • Using PH#1 screwdriver, begin to loose the twelve screws of the inner frame.

    • Starting at the bottom-right corner, continue to work your way around the frame counterclockwise until you can pull the frame off.

    • Remove the LCD panel which is already free.

  5. First, using a PH#1 screwdriver, loose the four screws located in the bottom of the frame (green boxes). Then, with slotted screwdriver, begin to lever the fourteen clips of the inner frame starting at the bottom of the TV.
    • First, using a PH#1 screwdriver, loose the four screws located in the bottom of the frame (green boxes).

    • Then, with slotted screwdriver, begin to lever the fourteen clips of the inner frame starting at the bottom of the TV.

    • Continue to work your way around the frame counterclockwise until you can pull the frame off.

    • Remove the already exposed polarized foils.

  6. Use your fingers to pry open the two connectors of the PCBs. Using PH#1 screwdriver, loose the ten screws used to fix the LEDs containing metal components. Take the two metal parts where the LED PCBs are located.
    • Use your fingers to pry open the two connectors of the PCBs.

    • Using PH#1 screwdriver, loose the ten screws used to fix the LEDs containing metal components.

    • Take the two metal parts where the LED PCBs are located.

    • Using PH#1 screwdriver, loose the two side screws used to fix the PCBs to the metal part.

    • Use a slotted screwdriver to separate the PCB that is glued to the mounting.

    • Repeat the previous couple of steps with the other metal part.

  7. All fractions obtained after TV dismantling.
    • All fractions obtained after TV dismantling.

Finish Line

Amaia

Member since: 03/23/2016

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 23

ABOUT RIC