Skip to main content
  1. Start the TV opening from the back side. The back cover is fastened with PH#2 screws (green marking). Using PH#1 screwdriver, finish loosening the last two screws, embedded in the connectors' housing.
    • Start the TV opening from the back side. The back cover is fastened with PH#2 screws (green marking).

    • Using PH#1 screwdriver, finish loosening the last two screws, embedded in the connectors' housing.

    • Manually pry open the sixteen clips and pull out the back cover.

  2. Remove cables: Detach all eleven connectors (red boxes) and three clips (blue boxes), and rip off the tapes used to fix the cables to the metal casing. To remove the PCBs, pull out the twelve PH#1 screws (green boxes). To remove the PCBs, pull out the twelve PH#1 screws (green boxes).
    • Remove cables: Detach all eleven connectors (red boxes) and three clips (blue boxes), and rip off the tapes used to fix the cables to the metal casing.

    • To remove the PCBs, pull out the twelve PH#1 screws (green boxes).

  3. Separate the speakers manually from their mountings (green boxes).
    • Separate the speakers manually from their mountings (green boxes).

  4. To access the LCD panel, first loose four PH#1 screws. Next, using slotted screwdriver, release eighteen clips that fix the front frame (blue boxes).
    • To access the LCD panel, first loose four PH#1 screws.

    • Next, using slotted screwdriver, release eighteen clips that fix the front frame (blue boxes).

    • Carefully turn the screen upwards and remove the LCD panel.

  5. Manually pull the frame off by levering the eighteen clips. Remove the polarized foils. Remove the polarized foils.
    • Manually pull the frame off by levering the eighteen clips.

    • Remove the polarized foils.

  6. Remove the protective foil from the two-sided adhesives (marked in blue) and access the backlight unit. Next, by releasing the three PH#1 screws, remove the small PCBs. Using slotted screwdriver, remove the LED stripes.
    • Remove the protective foil from the two-sided adhesives (marked in blue) and access the backlight unit.

    • Next, by releasing the three PH#1 screws, remove the small PCBs.

    • Using slotted screwdriver, remove the LED stripes.

  7. All fractions obtained after TV dismantling.
    • All fractions obtained after TV dismantling.

Finish Line

Amaia

Member since: 03/23/2016

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 49

ABOUT RIC