Skip to main content

Polaroid P50LED14 TV set

What you need

  1. Polaroid P50LED14 TV set, Opening: step 1, image 1 of 1
    • Start the TV opening from the back side.

    • The back cover is fastened with PH#2 screws (green marking).

    • Using PH#1 screwdriver, finish loosening the two screws which are located in the connector's housing.

    • Manually pry open the back housing from the front-frame.

  2. Polaroid P50LED14 TV set, Removal of Speakers: step 2, image 1 of 1
    • Manually pry open the connector (red box) and remove the speakers from their mountings (blue boxes).

  3. Polaroid P50LED14 TV set, Removal of Metal and Plastic-Parts: step 3, image 1 of 1
    • Using PH#1 screwdriver, loose eleven screws to separate metal and plastic parts.

  4. Polaroid P50LED14 TV set, Removal of Printed Circuit Boards (PCB): step 4, image 1 of 2 Polaroid P50LED14 TV set, Removal of Printed Circuit Boards (PCB): step 4, image 2 of 2
    • Remove cables: Detach all seven connectors (red boxes) and six clips (blue boxes). Next, rip off the tapes used to fix the cables to the metal casing.

    • The two PCBs are removed by using PH#1 screwdriver for the right placed PCB (4 screws) and PH#2 screwdriver for the left placed PCB (6 screws).

  5. Polaroid P50LED14 TV set, Removal of Liquid Crystal Display (LCD): step 5, image 1 of 2 Polaroid P50LED14 TV set, Removal of Liquid Crystal Display (LCD): step 5, image 2 of 2
    • Using PH#1 screwdriver, loose the only screw of the frame (green box).

    • Using slotted screwdriver, lever fifteen clips in order to remove the front frame.

    • Place the TV screen side-up and remove the LCD panel.

  6. Polaroid P50LED14 TV set, Removal of Polarized Foils: step 6, image 1 of 2 Polaroid P50LED14 TV set, Removal of Polarized Foils: step 6, image 2 of 2
    • Using slotted screwdriver, begin to lever the twenty-eight clips of the inner frame starting at the bottom of the TV.

    • Continue to work your way around the frame counterclockwise until you can pull off the frame.

    • Remove the polarized foils.

  7. Polaroid P50LED14 TV set, Removal of Backlights (LED): step 7, image 1 of 3 Polaroid P50LED14 TV set, Removal of Backlights (LED): step 7, image 2 of 3 Polaroid P50LED14 TV set, Removal of Backlights (LED): step 7, image 3 of 3
    • Using slotted screwdriver, loose the four clips (blue marking).

    • Remove the protective foil and access the backlight unit.

    • Using PH#1 screwdriver, loose the eight screws of the two PCBs (green boxes).

    • Using slotted screwdriver, lever the seven PCBs.

  8. Polaroid P50LED14 TV set, TV Dismantling Fractions: step 8, image 1 of 1
    • All fractions obtained after TV dismantling.

Finish Line

Amaia

Member since: 03/23/16

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 202