-
-
Start the TV opening from the back side
-
The back cover is fastened with PH2 screws (green marking).
-
Using PH1 screwdriver, finish loosening the two screws which are located in the connector's housing.
-
Manually pry the back housing from the front-frame.
-
-
-
Manually pry the connector (red box) and remove the speakers from their mountings (blue boxes).
-
-
-
Using PH1 screwdriver, loose eleven screws to separate metal and plastic parts.
-
-
-
Remove cables: Loosen all seven connectors (red boxes) and six clips (blue boxes), and tripped off the tapes used to fix cables to the metal-casing.
-
Remove Printed Circuit Boards (PCB):
-
Using PH2 screwdriver, loose four screws of one of the PCBs.
-
Using PH1 screwdriver, loose six screws of the other PCB.
-
-
-
Using PH1 screwdriver, loose the only screw of the frame (green box).
-
Using slotted screwdriver, lever fifteen clips in order to remove the front-frame.
-
Place the TV screen side-up and remove the already freed LCD panel.
-
-
-
Using slotted screwdriver, begin to lever the twenty-eight clips of the inner frame starting at the bottom of the TV.
-
Continue to work your way around the frame counterclockwise until you can pull the frame off.
-
Remove the already freed polarized foils.
-
-
-
Using slotted screwdriver, loose the four clips (blue boxes).
-
Trip off the protective foil and access the backlight unit.
-
Using PH1 screwdriver, loose the eight screws of the two connection PCBs (green boxes).
-
Using slotted screwdriver, lever the seven LED PCBs one by one.
-
