Skip to main content

Sony Vaio PCG-6J2L Internal Fan Replacement

What you need

    1. Sony Vaio PCG-6J2L Internal Fan Replacement, Sony Vaio PCG-6J2L Internal Fan Replacement: step 1, image 1 of 1
      • Set the computer display-side down.

      • Unlock the battery by sliding the port-side latch to the 'unlock' position.

      Add Comment

    2. Sony Vaio PCG-6J2L Internal Fan Replacement: step 2, image 1 of 1
      • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

      Add Comment

    3. Sony Vaio PCG-6J2L Internal Fan Replacement: step 3, image 1 of 1
      • Ignore the removal of the heat sink and memory panels as depicted. They do not need to be removed for the completion of this guide.

      • Remove the Torx security screw near the center of the battery-side edge.

      Add Comment

    4. Sony Vaio PCG-6J2L Internal Fan Replacement: step 4, image 1 of 2 Sony Vaio PCG-6J2L Internal Fan Replacement: step 4, image 2 of 2
      • Press the tabs on each side of the display-side of the keyboard with the flat edge of a spudger.

      • Pull the keyboard toward the mouse pad and gently lift up.

      Add Comment

    5. Sony Vaio PCG-6J2L Internal Fan Replacement: step 5, image 1 of 2 Sony Vaio PCG-6J2L Internal Fan Replacement: step 5, image 2 of 2
      • The keyboard is still attached by ribbon cable, don't try to remove the keyboard entirely yet.

      • Disconnect the ribbon cable by pressing the tabs on either side of the connector. Pull the cable out parallel to the connector.

      • Remove the keyboard.

      Add Comment

    6. Sony Vaio PCG-6J2L Internal Fan Replacement: step 6, image 1 of 1
      • Turn the laptop upside down.

      • Remove the three screws from the front mouse panel located on the bottom of the laptop.

      • Carefully flip the laptop back over. Remove three more screws from the top securing the panel. A ribbon cable will still be attached to the panel when you remove it.

      Add Comment

    7. Sony Vaio PCG-6J2L Internal Fan Replacement: step 7, image 1 of 2 Sony Vaio PCG-6J2L Internal Fan Replacement: step 7, image 2 of 2
      • Lift the mouse assembly just enough to access the connecting ribbon cable.

      • Lift the ribbon cable lock to remove the cable.

      • Carefully remove the mouse panel assembly and set aside.

      Add Comment

    8. Sony Vaio PCG-6J2L Internal Fan Replacement: step 8, image 1 of 3 Sony Vaio PCG-6J2L Internal Fan Replacement: step 8, image 2 of 3 Sony Vaio PCG-6J2L Internal Fan Replacement: step 8, image 3 of 3
      • Remove the four screws from the underside of the computer. These screws are located underneath where the battery sits and secure the top keyboard panel.

      • To remove the panel below the screen, press up on the two tabs holding the panel in and lift up. The panel should pop off.

      • Before proceeding, remove all black tape holding down wires and other cabling.

      Add Comment

    9. Sony Vaio PCG-6J2L Internal Fan Replacement: step 9, image 1 of 1
      • Pop off the antenna using a pair of tweezers.

      Add Comment

    10. Sony Vaio PCG-6J2L Internal Fan Replacement: step 10, image 1 of 1
      • Remove the seven philips screws holding the speaker assembly in place.

      • Before removing the assembly, disconnect the ribbon cable located at the top left corner of the assembly.

      • The speaker assembly will come off with the display assembly.

      Add Comment

    11. Sony Vaio PCG-6J2L Internal Fan Replacement: step 11, image 1 of 2 Sony Vaio PCG-6J2L Internal Fan Replacement: step 11, image 2 of 2
      • Caution: Be careful of snags when pulling up assembly and speakers.

      • To remove the VGA cable, lift up on the metal bracket and gently lift the connector off the logic board.

      • To remove the webcam cable, lift up the connector from the logic board gently.

      Add Comment

    12. Sony Vaio PCG-6J2L Internal Fan Replacement: step 12, image 1 of 3 Sony Vaio PCG-6J2L Internal Fan Replacement: step 12, image 2 of 3 Sony Vaio PCG-6J2L Internal Fan Replacement: step 12, image 3 of 3
      • Unscrew the four securing screws, two on each side of the LCD.

      • Carefully remove the LCD. The speaker, bluetooth, and webcam assembly will come up with the display assembly.

      • Caution: Be careful of snags when pulling up display and speaker assemblies.

      Add Comment

    13. Sony Vaio PCG-6J2L Internal Fan Replacement: step 13, image 1 of 2 Sony Vaio PCG-6J2L Internal Fan Replacement: step 13, image 2 of 2
      • Remove screws from keyboard tray

      • Remove keyboard tray

      Add Comment

    14. Sony Vaio PCG-6J2L Internal Fan Replacement: step 14, image 1 of 1
      • Caution: When removing the fan, be careful to not tear the attached ribbon cable.

      • Unscrew all five screws from the internal fan.

      • Gently remove the internal fan.

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

System

Member since: 09/24/09

2,562 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 84