How to disassemble Vacuum Cleaners

Step 1 How to disassemble Vacuum Cleaners

• Remove loose parts and the cover.
Step 2

• Remove the dust bag.
Step 3
• Remove the filter.
• Remove the filter on the back of the vacuum.
• Remove the rubber seal.
Step 4
• Cut the power cable.
Step 5
• Remove the case lid.
Step 6
• Some vacuum cases need to be unscrewed to remove.
Step 7
• Pry open the case.
• Remove the case.
Step 8
• Remove the cable drum.
• Remove the cable spring.
Step 9
• Remove all the metal from the plastic parts of the cable drum.
Step 10
• Pry off the plastic cover of the switch.
• Remove the nut.
Step 11
• Remove the PWB.
• Remove the screws that connect the PWB to the aluminium.
• Cut the wires of the PWB.
Step 12
• Remove the motor.
Step 13
• Separate the remaining materials according to their type and go on with the appropriate data sheet (e.g. aluminium, ferrous metals, plastic, further PWBs, etc.). Make sure the plastic parts are completely free of metal pieces.

Author

with 1 other contributor

Tobias Isakeit

Member since: 03/15/18

21 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview