Skip to main content
/

Changes to Step #3

Edit by Paul

Edit approved by Paul

Before
After
Unchanged

Step Lines

+[title] Loosening of Cables, Adhesives and Screws to remove the mainboard
+[* black] The first step of removing the mainboard is loosening the connector as indicated in the first figure. Also three screws need to be removed using a #00 screw driver.
+[* black] Next, a one-sided adhesive close to one of the outer edges of the device (close to the headphone connectors) needs to be removed. The two crews that are marked in the second figure can be removed using a #00 screw driver.
+[* black] The large patch of copper tape highlighted in figure three needs to be pulled off slowly. After this, the speaker on one of the short edges of the device can be easily removed.
+[* black] After this, the mainboard can be removed from the device. Display cables and the connection to the speakers are still attached to the mainboard and may be removed.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added