Skip to main content
/

Changes to Step #6

Edit by Maarten Depypere

Edit approved by Maarten Depypere

Before
After
Unchanged

Step Lines

[title] Removal of Backlights (LED)
-[* black] Using slotted screwdriver, loose the two clips (blue boxes). To access the backlight, remove the protective foil first.
-[* black] Using PH#2 screwdriver, loose five screws per LED stripe (green boxes).
-[* black] Manually disconnect the four cable connectors (red boxes) and separate each PCB.
+[* light_blue] Using slotted screwdriver, loose the two clips (blue boxes). To access the backlight, remove the protective foil first.
+[* green] Using PH#2 screwdriver, loose five screws per LED stripe (green boxes).
+[* red] Manually disconnect the four cable connectors (red boxes) and separate each PCB.