Changes to Step #45
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
| + | [* red] Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total). |
|---|---|
| + | [* icon_note] If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws. |
Image 1
No previous image
Added